Cleaning and care
To reduce the risk of electrical shock, disconnect the appliance from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before maintenance.
Never use cleaning agents containing abrasive substances such as sand, soda (sodium carbonate), acids or chemical solvents.
Make sure that water cannot get into the electronic unit or into the lighting.
Do not let water get into the drainage channel or drain hole when cleaning.
Do not use steam cleaning equipment to clean the appliance. Steam could reach the electrical components and cause a short circuit.
The data plate located inside the appliance must not be removed. It contains information that will be required in the event of a Service call.
Before cleaning
^Unplug the appliance from the socket.
^Take out any removable parts, e.g. shelves, for cleaning.
Cleaning the interior, door and accessories
Use a mild solution of warm water and liquid dish soap. All accessories and shelves should be
^Clean the condensate channel and drain hole frequently, so that condensate can drain away unhindered. Use a straw or similar item to clear the drain if necessary.
^After washing, wipe down the interior and accessories with a clean wet cloth, then dry with a soft cloth. Leave the appliance doors open for a short time, so the moisture can evaporate Clean the appliance door with a proprietary glass cleaner.
Ventilation slits
^The ventilation slits should be cleaned regularly with a brush or vacuum cleaner. A
20
