Frequently asked questions
With the aid of the following guide minor problems can be corrected without a service call.
Repairs should only be carried out by a qualified and trained person in strict accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage and may void the warranty.
What if the appliance does not get cold?
Possible fault | Solution |
|
|
The machine is not turned on. | Check whether the appliance is |
| switched on. The display must be lit up. |
|
|
The machine is not plugged in. | Check that the plug is correctly |
| inserted in the power outlet. |
|
|
Check that the fuse has not tripped. | Reset the circuit breaker. |
|
|
What if the compressor kicks on very frequently and for too long?
The ventilation slits are covered or | Clean with a vacuum or brush. |
dusty. |
|
|
|
The door has been opened too | Once the appliance returns to the set |
frequently. | temperature the compressor will turn |
| off. |
|
|
The door is not closed. | Check that the door has been closed |
| properly. |
|
|
What if the alarm sounds and the temperature display flashes?
The appliance door has been opened | Close the door. | |
for more than 60 seconds. | ||
| ||
|
| |
The appliance door has been opened | One of these conditions has caused the | |
too frequently. | temperature in the appliance to | |
| become too warm or cold. | |
The ventilation slits are covered. | ||
Once the alarm condition has been | ||
| ||
A power failure has occurred. | ||
corrected, the temperature display will | ||
| light up continuously and the alarm will | |
| turn off. | |
|
|
22
