Time left display, Future updates PC | Miele M.-Nr. 06 761 400

Description of the machine

Time left display

After the start of a programme, the duration of the programme selected will be shown in the display counting down in hours and minutes and finally in minutes. At some points during the wash, the time shown can change. This is normal.

Future updates (PC)

The indicator or check light marked PC is the interface used by Miele service technicians during servicing work for testing purposes and for updating the machine's programme data.

11

Image 11

Miele M.-Nr. 06 761 400 operating instructions Time left display, Future updates PC

Contents

Operating instructions for Washing machine Prestige Plus Disposal of your old appliance or machine Caring for our environmentDisposal of the packing material Contents Contents Consumption data Technical data Correct application Safety with children Technical safety Correct use Accessories Water plus system Description of the machineSpecial programmes Delicates and Silks / programmes Time left display Future updates PC Control panel Programme duration You can also omit the final spin Important control panel featuresSpin button with indicator lights Selecting the spin speed Additional option buttons Before using for the first time Detergent When drying with a tumble dryerWashing environmentally and economically Energy and water consumption Brief instructions How to wash correctly Minimum iron 30C to 60C Max. load 2.5 kg Programme chart Cottons 9ö8761 30C to 95C Max. load 5.0 kg Woollens2 /ac1 Cold to 40C Max. load 2.0 kg Delicates 21ac1 Cold to 40C Max. load 1.0 kgSilks /c1 30C Max. load 1.0 kg Separate rinse2 Max. load 5.0 kg Quick wash 40C Max. load 2.5 kgAutomatic 40C Max. load 3.0 kg Starch Max. load 5.0 kg Ironing Garment care label symbols WashingProfessional cleaning Drying Sort the laundry Before washing Selecting a programme Soak Additional options Select additional options if requiredShort Pre-wash Press the Start button Adding detergent Close the drum door Switch off the washing machineAt the end of a programme Remove the laundry Door cannot be opened, if Adding or removing laundry after a programme has startedPlease note Skipping a programme stage To cancel or select a different programmeInterrupting a programme Altering a programme once selected Main wash Rinses Spinning Programme sequence Special features in the programme sequences Liquid detergent DetergentWater softeners Washing with several components Adding starch separately Fabric conditioners and liquid starchColour run and dye removers/ dyes Adding fabric conditioner separately External casing and fascia panel Cleaning and careCleaning the detergent dispenser drawer Cloth Extra cleaning Descaling the machine Cleaning the detergent dispenser drawer housing To clean the filter in the water inlet valve Cleaning the water inlet filters Programme does not start Problem solving guideProblem Possible cause Remedy System has reacted Flashing Appears in the display Wash programme stops and a fault indicator light comes onProblem Possible cause Remedy a Water protection Call the Service Department Check light comes on Indicator light isFlashes General problems or an unsatisfactory wash result Grey, greasy Problem Possible cause Remedy Liquid detergentDoes not give Required result Drum door does not open when you press the Door button Remove the lever Procedure for draining the machineUse it to open the access flap Blocked drain outlet Opening the drum door Customer contact Optional accessories Front view Installation and connection Rear view Removing the transit bars Installation surfaceInstalling the washing machine Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feet Replacing the lid Drain hose Electronic unit and washing machine housingMiele water protection system Inlet hose Extension hose Maintenance and careConnection to the water supply Drain hose connection Connection to the drainage system Electrical connection U.K Non-rewireable plugs BS Duration Consumption data Technical data Page Programmable functions For changing standard settings Water plus system Settings are as followsProgrammable functions Programmable functions Follow steps a to G to programme and store in memory Gentle action Top-up rinse for Cottons Memory Function Soak Page Page Alteration rights reserved/3007/Prestige Plus Nr 761 400