Re-fitting the transit bars | Miele M.-Nr. 06 761 400 guide

Installation and connection

,To avoid the risk of injury the holes for the transit bars must be covered after the transit bars have been removed.

^Fit the covers on to the two holes. Then plug the holes as shown with the caps.

^Secure the transit bars to the back of the washing machine. Make sure that holes b are fitted over retainers a.

,The washing machine must not be moved without the transit bars in place.

Store the transit bars as shown or keep them in a safe place for future use. They must be re-fitted if the machine is to be moved again (e.g.when moving house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the procedure.

49

Image 49

Miele M.-Nr. 06 761 400 operating instructions Re-fitting the transit bars

Contents

Operating instructions for Washing machine Prestige Plus Disposal of the packing material Caring for our environmentDisposal of your old appliance or machine Contents Contents Consumption data Technical data Correct application Safety with children Technical safety Correct use Accessories Special programmes Description of the machineDelicates and Silks / programmes Water plus system Time left display Future updates PC Control panel Programme duration Spin button with indicator lights Selecting the spin speed Important control panel featuresAdditional option buttons You can also omit the final spin Before using for the first time Washing environmentally and economically When drying with a tumble dryerEnergy and water consumption Detergent Brief instructions How to wash correctly Minimum iron 30C to 60C Max. load 2.5 kg Programme chart Cottons 9ö8761 30C to 95C Max. load 5.0 kg Silks /c1 30C Max. load 1.0 kg Delicates 21ac1 Cold to 40C Max. load 1.0 kgWoollens2 /ac1 Cold to 40C Max. load 2.0 kg Automatic 40C Max. load 3.0 kg Quick wash 40C Max. load 2.5 kgStarch Max. load 5.0 kg Separate rinse2 Max. load 5.0 kg Professional cleaning Garment care label symbols WashingDrying Ironing Sort the laundry Before washing Selecting a programme Short Additional options Select additional options if requiredPre-wash Soak Press the Start button Adding detergent At the end of a programme Switch off the washing machineRemove the laundry Close the drum door Please note Adding or removing laundry after a programme has startedDoor cannot be opened, if Interrupting a programme To cancel or select a different programmeAltering a programme once selected Skipping a programme stage Main wash Rinses Spinning Programme sequence Special features in the programme sequences Water softeners DetergentWashing with several components Liquid detergent Colour run and dye removers/ dyes Fabric conditioners and liquid starchAdding fabric conditioner separately Adding starch separately Cleaning the detergent dispenser drawer Cleaning and careCloth Extra cleaning External casing and fascia panel Descaling the machine Cleaning the detergent dispenser drawer housing To clean the filter in the water inlet valve Cleaning the water inlet filters Problem Possible cause Remedy Problem solving guideProgramme does not start Problem Possible cause Remedy a Wash programme stops and a fault indicator light comes onWater protection Call the Service Department System has reacted Flashing Appears in the display Flashes Indicator light isCheck light comes on General problems or an unsatisfactory wash result Does not give Problem Possible cause Remedy Liquid detergentRequired result Grey, greasy Drum door does not open when you press the Door button Use it to open the access flap Procedure for draining the machineBlocked drain outlet Remove the lever Opening the drum door Customer contact Optional accessories Front view Installation and connection Rear view Installing the washing machine Installation surfaceRemoving the transit bars Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feet Replacing the lid Miele water protection system Electronic unit and washing machine housingInlet hose Drain hose Connection to the water supply Maintenance and careExtension hose Drain hose connection Connection to the drainage system Electrical connection U.K Non-rewireable plugs BS Duration Consumption data Technical data Page Programmable functions For changing standard settings Programmable functions Settings are as followsWater plus system Programmable functions Follow steps a to G to programme and store in memory Gentle action Top-up rinse for Cottons Memory Function Soak Page Page Alteration rights reserved/3007/Prestige Plus Nr 761 400