Problem solving guide
A fault indicator light comes on but the wash programme continues as normal
Problem | Possible cause | Remedy A |
The Check drain light | The drain outlet is | Clean the drain filter and the drain |
flashes. | restricted. | pump as described in "Problem |
|
| solving guide - Opening the drum |
|
| door in the event of a blocked |
|
| drain outlet and/or power failure". |
The Check inlet light | The water inlet is | Check whether |
flashes. | restricted. | – the stopcock is opened wide |
|
| enough. |
|
| – the inlet hose is kinked. |
| The filter in the | Clean the filter. |
| water inlet hose is |
|
| dirty. |
|
The Excess detergent | Excessive foam | Use less detergent next time and |
check light comes on. | has built up | follow the manufacturer’s |
| during washing. | instructions on dosage given on |
|
| the packaging. |
The Main wash | There is a fault. | Start the programme again. |
indicator light is |
| If the fault indicator occurs again, |
flashing. |
| contact the Service Department. |
The | The position of the programme selector was altered | |
indicator light is | after the start of the programme. Turn the programme | |
flashing. | selector back to the programme previously chosen. | |
|
|
|
ATo switch off the fault indicator: switch the washing machine off with the
38
