Top-up rinse for Cottons
When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
Top-up rinse takes place when
temperatures of 95°C and 75°C are
selected.
Top-up rinse should be activated:
–to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
The washing machine is delivered with
the Top-up rinse for Cottons
de-activated.
Follow steps Ato Gto programme
and store in memory.
Before you begin, first ensure that:
–The washing machine is switched off.
–The machine is properly closed.
–The programme selector is at Finish.
APress the Start button and keep it
pressed in whilst carrying out steps
Bto C.
BSwitch the machine on with the
I-On/0-Off button.
CWait until the Start indicator light
comes on . . .
D. . . and then release the Start
button.
ETurn the programme selector to the
Cottons 40°C position:
APwill flash in the display alternating
with the number 0or 1.
0= Top-up rinse is deactivated
1= Top-up rinse is activated
FPress the Start button to change from
one to the other. The display will
change accordingly from 0to 1or
from 1to 0.
GSwitch the washing machine off with
the I-On/0-Off button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
Programmable functions
63