Installation
When building in the appliance, ensure that the vent outlets at the front of the appliance are not hindered, and that there is adequate ventilation to the rear of the housing unit by leaving a large enough gap (see diagram: 50 mm x unit width). Do not block the ventilation gaps with any objects.
The appliance is designed to be built into a tall unit.
To transport the appliance, make sure that you lift it by the appliance housing and not by the frame. The frame is not sturdy enough to bear the weight of the appliance when it is being carried.
Building-in dimensions
The following items are supplied in the accessory pack for installing the appliance:
4 x 16mm
3
51
