Changing the light bulb
The machine will not operate if the light
bulb is burnt out.
^Disconnect the power supply to the
work area by unplugging the unit,
tripping the circuit breaker or
removing the fuse.
^Open the detergent dispenser
drawer. Remove the tool from the rear
side of the panel.
^Open the drum door.
^Insert the tool into the slit of the light
bulb, turn counterclockwise until
resistance is felt.
^Pull out the drum lighting.
^Press together the hooks of the
plastic fitting, 2, to separate it from
the bulb,1.
^Replace the bad light bulb with a
new one.
A replacement bulb can be obtained by
contacting Miele.
The light bulb must not exceed the
maximum wattage listed on the data
plate.
^Insert the light bulb into the plastic
fitting.
^Insert the drum lighting in the socket
and turn clockwise.
To use the washer it is absolutely
necessary to have the light bulb
properly installed.
Frequently asked questions
42