Settings - Supervisor level
Auto load control | Main wash water |
The washer has an Auto load control. The water levels and the program running times are adjusted to the load size. If the load size automatic is turned off the program will always run as if for a full load.
The machine comes factory set with this option turned on.
Pre-wash water
The water type for the
The water type for the main wash can be selected (except for the programs "Woollens", "Silk" and "Curtains"). The hot water intake will be only accessible at a wash temperature of 86°F/30°C or higher.
The machine comes factory set with the water type "hot".
If the washer is not connected to hot water, the program running times will be extended and vary from the displayed remaining times.
If "Industrial water" is used, the washer must be refitted accordingly.
The machine comes factory set with the water type "hot".
Rinse water
The water type for the rinse in the programs "Cottons Hygiene", "Cottons Uni.", "Minimum iron", "Table linen", "Kitchen linen", "Towelling" and "Sluice" can be selected. The hot water intake will be only accessible at a wash temperature of 50°C or higher.
The machine comes factory set with the water type "hot".
If "Industrial water" is used, the washer must be refitted accordingly.
67
