Installation

Hot water connection

Connecting the machine to a hot water supply will lead to low electrical consumption during hot water operation. The hot water temperature at the water faucet must not exceed 158°F (70°C).

The water in single water lines from the hot water source cools faster when not in constant use. To heat the wash water more electricity must be used. The same conditions for the hot water as for the cold water connection will then apply.

^Connect the hot water intake hose (red mark) to the water faucet.

The connection of the machine to a hot water line only, is not possible for functional reasons.

If the washer is not to be installed for hot water connection, the settings "Main wash", "Pre-wash" and "Rinse" must be adjusted respectively. The hot water intake hose must be removed.

^Select in "Settings - Supervisor level" the respective options "cold".

The program times may be extended.

^Unscrew the hot water intake hose (red mark).

^Screw on the supplied stopper.

54

Page 54
Image 54
Miele PW 6065 manual Hot water connection