Maintenance and care
Replacing the Active HEPA filter
^Open the dust compartment lid.
^Raise the filter and remove it.
^Replace with a new filter, and push it down into place.
^Close the dust compartment lid firmly. It should click into place.
Resetting the exhaust filter change indicator
The filter change indicator needs to be reset each time the filter is replaced. To do this the vacuum cleaner must be switched on.
^Press the reset button.
The exhaust filter change indicator goes out and resets to zero.
The filter change indicator can only be reset by pressing the reset button after the light has come on. Pressing the button at any other time will have no effect.
26
