Problem solving guide / After sales service
The vacuum cleaner switches off automatically, and the overheating warning light , comes on.
A temperature limiter switches the vacuum cleaner off automatically if it gets too hot. The overheating warning light will then come on to indicate that it has overheated.
This can occur if, for instance, large articles block the suction tube or when the filter bag is full or contains particles of fine dust. A heavily soiled exhaust or dust compartment filter can also be the cause of overheating. Switch the vacuum cleaner off immediately using the On/Off foot control s. Disconnect from the electricity supply. Switch off at the wall socket and remove the plug.
After removing the cause, wait for approx. 20 - 30 minutes to allow the vacuum cleaner to cool down. It can then be switched on again.
After sales service
In the event of a fault that you cannot easily remedy, please contact
–your Miele dealer, or
–the nearest Miele Service Department (see address on back page).
Please note that telephone calls may be monitored and recorded for training purposes.
30