Maintenance and care
When to change the thread catcher pads on the standard floor brush
(depending on model)
Check the thread catchers on the bottom of the standard floor brush and the upholstery nozzle, from time to time.
Replace the thread catchers if the pile is worn.
Replacing the thread catchers on the standard floor brush (depending on model)
Use a knife or similar object to remove the thread catchers from the slots.
Insert the new thread catchers.
Servicing the floor roller on the standard floor brush (depending on model)
Use a coin to release the roller pin and pull it out.
Push and take out the roller axle.
Take out the roller.
Remove all threads, hair, etc. and reassemble the parts.
Spare parts are available from your Miele vacuum dealer or Miele.
30
