OPERATING INSTRUCTIONS cont.
OPERATING INSTRUCTIONS cont.
Multi-Mixer Assembly
Caution: Ensure that the appliance is unplugged from the electrical power source before changing attachments. Do not immerse the mixer gear box in water.
1.To attach the mixer gear box to the Power Pack, line up arrow on the Power Pack and Mixer Gear Box.
2.Push Power Pack onto Mixer Gear Box until seated.
3.While grasping Mixer Gear Box rotate it 90º clockwise until the arrow on
the Power Pack aligns with the “Square” on the Mixer Gear Box.
4.To disassemble Mixer Gear Box and Power Pack rotate Mixer Gear Box 90º counterclockwise.
Attaching the Attachments to the Mixer Gear Box
Caution: Ensure that the appliance is unplugged from the electrical power source before changing attachments. Do not immerse the mixer gear box in water.
Select the desired attachment, either the Dough Hooks, Wire Beaters or Whisk and assemble to Mixer Gear Box as noted below:
A)Dough Hooks (2)
For use with light dough ONLY.
•Insert stem end of dough hooks (one at a time) into opening in base of Mixer Gear Box.
•Rotate slightly while pressing gently until dough hook “Clicks” into place.
•Repeat for second dough hook.
•Ensure that dough hooks are well seated in Mixer Gear Box.
B)Wire Beaters (2)
Follow same installation procedure as above.
C)Wire Whisk
This attachment is used for beating air into mixtures such as egg whites, yolks or creams..
•To install, place stem of Wire Whisk into either of the openings in the Mixer Gear Box.
•Rotate Wire Whisk while pushing gently until Wire Whisk “Clicks” into place.
•Ensure that Wire Whisk is well seated in Mixer Gear Box.
1.After attaching the desired accessory into the mixer gear box, plug the mixer into power source.
2.Hold the power pack with one hand and press and hold the On/Off switch with your index finger.
3.Ensure that there are no obstructions and that the accessories are moving freely in the mixing container.
4.When finished using the unit, unplug the unit before removing the accessories.
Care & Maintenance
Caution: Ensure that the appliance is unplugged from the electrical power source before changing or cleaning attachments. Do not immerse the mixer gear box in water.
1.The unit and the various attachments should be cleaned after each use.
2.All accessories and glass beaker can be cleaned with warm soapy water.
3.Use a damp cloth or sponge to clean the housing of the power pack. Do NOT immerse in water or any other liquid.
Caution: Use extreme caution when cleaning the chopper blade or metal stick blender because blades are SHARP.
Storing Your Unit
You may store your unit in the wall bracket provided. Do NOT wrap power cord around unit. Coil the cord in loose loops and tie with a tye wrap or twist tie.
It is recommended that the chopping blade be stored inside the glass beaker as blade is very sharp.
7 | 8 |
