Miele T 4423 C Problem Possible cause Remedy, Airways lamp comes, Stops and the Clean, Flashes

Models: T 4423 C

1 48
Download 48 pages 15 Kb
Page 31
Image 31

Problem solving guide

Problem

Possible cause

Remedy

The Clean out

The fluff filters may be

Remove any fluff (see

airways lamp comes

blocked.

"Cleaning and care").

on.

The condenser unit may be

Please note that the

 

blocked with fluff and

condenser unit must be

 

detergent residues.

cleaned regularly (see

 

 

"Cleaning and care").

 

 

The check lamp will go out

 

 

when the door is opened.

The programme

Possible causes and remedies are described above in

stops and the Clean

(The Clean out airways lamp comes on).

out airways lamp

There is no obvious cause.

– Switch off the dryer.

flashes.

 

– Then switch the dryer

 

 

 

 

back on and start the

 

 

programme again.

 

 

If the programme stops

 

 

again and the Clean out

 

 

airways lamp flashes, there

 

 

is a fault. Contact the Miele

 

 

Service Department.

The Empty out

The condensed water

– Empty out the

container indicator

container is full or there is

condensed water

lamp comes on.

kink in the drain hose.

container.

 

 

– Check the drain hose.

 

 

– Before starting a new

 

 

programme, first switch

 

 

the dryer off and then on

 

 

again.

31

Page 31
Image 31
Miele T 4423 C Problem Possible cause Remedy, Airways lamp comes, Stops and the Clean, Flashes, Lamp comes on