Miele T 4423 C operating instructions Delay start, Short, Low temperature, Buzzer

How to dry correctly

Short E Delay start

For drying fabrics which can withstand high temperatures, e.g. pure linens and cottons. Do not use on minimum iron or delicate fabrics.

–Because the heater rating is increased clothes dry faster thus shortening drying times.

Low temperature

For drying delicate fabrics with the symbol r (e.g. acrylic garments) at a lower temperature.

Because the heater rating is reduced clothes dry more slowly thus lengthening drying times.

Buzzer

An audible tone sounds repeatedly at the end of a programme.

^The buzzer can be switched on or off after a programme has started.

The volume (and pitch) of the buzzer can be adjusted before a programme is started:

^Select the programme.

^Press the "Buzzer" button (the "Buzzer" indicator lamp will light up) until the desired volume / pitch is achieved. Then release the button.

Once a programme has been

selected, the start can be delayed by 30 minutes (30) up to 24 hours (24^).

^Press the Delay start button repeatedly until the required time appears in the display :

-up to 10^ in 30 minute stages.

-over 10^ in 1 hour stages. The time will run up to 24^ by keeping the button pressed in.

Press the Start button. The chosen time will count down as follows:

–from 24^ to 10^ in 1 hour stages.

–less than 10^ in 1 minute stages.

The dryer starts automatically once the delay start period has elapsed. The time left will appear in the display approx. 1 minute into the programme.

To cancel "Delay start":

Before the Start button has been pressed:

^Press the Delay start button once when 24^ is showing in the display;

After the Start button has been pressed:

^Turn the programme selector to the Finish position.

16