Frequently asked questions
What if the dryer will not run?
Possible fault | Solution |
|
|
The "Start/Stop" button was not | Make sure the dryer is on. Press the "Start/ |
pressed. | Stop" button to begin the drying program. |
|
|
The circuit breaker tripped or | Make sure the dryer is plugged in or reset the |
the dryer is unplugged. | circuit breaker. |
|
|
The door is not closed. | Close the door properly. |
|
|
How do I prevent static cling?
Add fabric softener to laundry when washing or select the "Less Dry" setting on the dryer.
What if the drum light does not come on?
Possible fault | Solution |
|
|
The bulb may be bad or burned | See "Changing the light bulb." |
out. |
|
|
|
What if the "Child Lock" indicator flashes after turning the dryer on and a program cannot be started?
Possible fault | Solution |
|
|
The child lock is activated. | Deactivate the child lock. See "Child Lock." |
|
|
What if the program stops, the
Possible fault | Solution |
|
|
The drum is empty. | Load laundry into the dryer. The dryer will not |
| operate if the drum is empty. Single items |
| should be dried with "Sturdy" or a timed |
| program. For dry items use the "Fluff" program. |
|
|
What if the "Filter/Vent" fault indicator is lit? | |
Possible fault | Solution |
|
|
The lint filter is clogged. | Clean the lint filters. See "Dryer care". |
|
|
The exhaust hose or the | Remove lint and check the exhaust system for |
connection is clogged with lint. | blockages. |
|
|
The air supply in the room is | Open a window or door to increase airflow. |
insufficient. |
|
|
|
18
