Standby display Memory, Anti-crease, Off | Miele W 1513 guide

Programmable functions

Standby display

Memory

To save energy, the display goes out and the indicator light for the Start/ Stop button will start flashing slowly.

The display will always go out,

–if a programme is not selected within 10 minutes of the machine being switched on.

–10 minutes after the end of a programme.

Pressing one of the buttons switches the display back on again.

You can also choose whether you want the display to go out 10 minutes after a programme has started or to remain visible throughout the programme.

On

The standby function is switched on. When this option is selected, the display will go out 10 minutes after a programme has started.

Not in current prog.

(the machine is delivered with this option selected)

The standby function is switched off. The display will remain visible during a programme.

The washing machine will store the most recently selected settings (programme, temperature, spin speed and any extra options) in memory once the programme has started.

These settings will appear in the display the next time the machine is switched on.

The machine is delivered with the memory function deactivated.

Anti-crease

Anti-crease helps prevent creasing if laundry is not normally removed immediately after the end of a programme.

The drum will turn at intervals for up to 30 minutes after the programme has finished.

The door can be opened and laundry removed at any time during the anti-crease phase.

On

(the machine is delivered with this option selected)

Anti-crease is activated.

Off

Anti-crease is deactivated.

59

Image 59

Miele W 1513 operating instructions Standby display Memory, Anti-crease, Not in current prog, Off

Contents

Operating instructions for Washing machine W Disposal of your old appliance or machine Caring for our environmentDisposal of the packing material Contents After sales service Consumption data Technical data Programmable functions Correct application Safety with children Technical safety Correct use Accessories Control panel Operating the washing machine Programmable functions Programme duration Running your first programme Before using for the first timeSetting the language Reminder to remove transit bars Detergent When drying with a tumble dryerWashing environmentally and economically Energy and water consumption Sort the laundry How to wash correctlyBrief instructions Select a programme Switch on the washing machine Load the drumSelect a temperature / spin speed Shut the door with a gentle swing Pre-wash Select an extra optionsShort Water plus Add detergent Start the programme Remove the laundry when the programme has finished To omit the final spin Rinse hold SpinningFinal spin speed Rinse and interim spin Programme chart Dark garments Cold to 40C Max. load 3.0 kg Automatic Cold to 40C Max. load 3.5 kgShirts Cold to 60C Max. load 1.5 kg Denim Cold to 60C Max. load 2.0 kg Main wash Rinses Spinning Programme sequence Special features in the programme sequences Garment care label symbols Changing a programme Cancelling a programmeChanging the programme sequence Interrupting a programme Adding or removing laundry after a programme has started Safety lockTo activate the safety lock To deactivate the safety lock All purpose Detergent for Coloured fabrics Delicates Whites DetergentCorrect detergent Right amount to dispense will depend on the following Water softenersWashing with several components Colour run and dye removers / dyes Fabric conditioners and liquid starch External casing and fascia panel Cleaning and careCleaning the detergent dispenser drawer Extra cleaning Descaling the machine Cleaning the siphon and conditioner channelCleaning the detergent dispenser drawer housing To clean the filter in the water inlet valve Cleaning the water inlet filters Programme does not start Problem solving guide Problem Possible cause Remedy a Fault messages in the display General problems An unsatisfactory wash result Drum door does not open when you press the Door button Blocked drain outlet Procedure for draining the machineRemove the lever Opening the drum door Optional accessories After sales serviceFuture updates PC Appliance guarantee Front view Installation and connection Rear view Removing the transit fittings Installation surfaceTransporting the machine to its installation site Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feet Please note Building under a worktopWasher-dryer stack Drain hose Electronic unit and washing machine housingMiele water protection system Inlet hose Extension hose Maintenance and careConnection to the water supply Drain hose connection Connection to the drainage system Electrical connection U.K Non-rewireable plugs BS Consumption data Technical data Programmable functions For changing default settings Language F Programmable functions Suds cooling Water plusGentle action To enter the code To use the washing machine when the code is activatedCode To activate the code Brightness Temperature unitBuzzer Keypad tone Off Standby display MemoryAnti-crease Not in current prog Alteration rights reserved/1707/W Nr 972 290