Any workdone on the electrical components of this appliance should only
be performed bya qualified technician in accordance with all local and na-
tional codes and regulations. Unauthorized repairs may result in personal
injury and machine damage.
Whattodoif,... Cause . . . Remedy . . .
. . . The program does
not start?
There is no power.
The "ON" indicator lamp
has not lit up.
Check that..:
–the door is properly
closed.
–the machine is plugged
in.
–the fuse or circuit
breaker has not trip-
ped.
There is power and the
"ON" indicator lamp is on,
but the program selector
has not been turned to
the "Finish / Start" posi-
tion.
–Turn the program se-
lector to the "Finish /
Start" position.
–Select a program.
. . . The "Check / "
indicator lamps are
flashing?
The "Check p" indicator
lamp is flashing, and the
program has started.
The water inlet is blocked.
–The inlet valve is not
opened far enough.
–The inlet hose is
kinked.
–The water pressure is
too low. Call the Techni-
cal Service Dept.
The "Check q" indicator
lamp is flashing.
The drain is blocked.
–Clean the drain pump
and lint trap.
–Has the drain hose
been installed too
high? (max drain height
= 4 feet)
Problem solving guide
25