Cleaning and care

Cleaning the water inlet filters

The washing machine has two water in- take filters to protect the intake valves.

one in the open end of the intake hose.

and one where the hose is con- nected to the machine only to be cleaned by a technician.

The filter in the open end of the hose should be cleaned if intake problems occur, or after an interruption of the ex- ternal water supply.

To clean the filter in the intake hose:

^Turn off the main water valve.

^Unscrew the intake hose from the valve.

^Remove the flat gasket from inside the hose and, using needle nose pli- ers, grab the plastic tab and pull to remove the filter. Clean the filter un- der running water.

^Replace the filter and gasket in the reverse order and reconnect the hose.

Turn on the valve and check that the connection is water tight. If the connec- tion drips and cannot be tightened any further, the gasket may need to be re- placed.

Always replace the intake filter after cleaning it.

24

Page 24
Image 24
Miele W 1930 operating instructions Cleaning the water inlet filters, To clean the filter in the intake hose