Building in
This machine can be installed under a
countertop either with or without a lid. If
the lid is removed, the protective cover
located underneath must be left in
place. An optional UBS spacer kit (Part
#1542631) can also be used to raise
the machine an additional 2", if neces-
sary.
The dimensions below show the ma-
chine being installed under the
countertop, with the lid in place.
^Necessary electrical outlets, drain,
and water connections should be
close to the machine and easily ac-
cessible. If possible, place them in a
cabinet adjacent to the washing ma-
chine, not behind it, so they can be
reached in an emergency.
^
Slides are available as an accessory
(part # 0132 2830) to prevent dam-
age to the floor when moving the ma-
chine into position.
Remember to consider the space re-
quired by any electrical and plumb-
ing connections when calculating
distances between the machine and
the wall or cabinets.
Washer/ Dryer Stack
This Miele washing machine can be in-
stalled as part of a washer dryer stack
in combination with a Miele tumble
dryer.The dryer can only be stacked on
top of the washer and never vice versa.
For this purpose, a stacking kit is avail-
able from the Miele Technical Service
department or your Miele dealer.
A washer and dryer should never
be stacked without using the
proper stackingkit. Doing so is
extremelydang erous,as the dryer
may vibrate off of the washing ma-
chine during use.
INSTALLATION INSTRUCTIONS
35