Garment care label symbols

IAdding detergent

It is important to dispense the correct amount, because. . .

. . . too little detergent results in:

Laundry not getting properly clean and with time it may become grey and hard to the touch.

Greasy particles cling to the laundry.

Limescale deposits on the heater elements.

. . . too much detergent results in:

Excessive foam, which causes a low level of agitation and poor wash, rinse and spin results.

higher water consumption because an extra rinse is automatically activated

A burden to the environment.

^Pull out the detergent drawer and place detergent in the compartments as follows:

i= Pre-wash

(if selected, add 1/4 of the total amount recommended for the programme). This compart- ment is also used for starch formulations when starching separately.

j= Main wash

including the Soak period if selected

§= Fabric conditioner or liquid starch.

^Close the detergent drawer.

See section on "Detergent" for further information on detergent and the amount to dispense.

JPress the Start button

This starts the programme. The maximum programme duration will then show in the display.

24

Page 24
Image 24
Miele W 2240 operating instructions IAdding detergent, JPress the Start button