Programmable functions
Top-up rinse for Cottons
When this is activated, additional water flows into the drum at the end of the main wash to cool the suds down. Hot suds can damage plastic drainage pipes.
–to prevent the danger of scalding if the drain hose is hooked over the edge of a sink or basin.
–where the drainage pipes do not comply with DIN 1986.
The washing machine is delivered with the
Follow steps A to G to programme and store in memory.
Before you begin, first ensure that:
–The washing machine is switched off.
–The machine is properly closed.
–The programme selector is at Finish.
APress the Start button and keep it pressed in whilst carrying out steps B to C.
BSwitch the machine on with the
CWait until the Start indicator light comes on . . .
D. . . and then release the Start button.
ETurn the programme selector to the Cottons 40°C position:
A P will flash in the display alternating with the number 0 or 1.
0=
1=
FPress the Start button to change from
one to the other. The display will change accordingly from 0 to 1 or from 1 to 0.
GSwitch the washing machine off with the
The setting you have selected is now stored in memory and will remain so until you alter it.
61
