Introduction
This chapter will guide you through the initial setup of EvolutionTV. Before proceeding, make sure
you have connected EvolutionTV to a USB 2.0 port of your Mac. Also ensure the power supply is
connected at all times.
Connect your TV antenna via a coaxial cable or your video source (digital TV receiver for example) via
Composite/S-Video.
I. Serial Number and Registration
1. Launch EvolutionTV located in your Applications folder
2. You will be asked to enter your serial number located on the CD sleeve or the CDitself. Enter
the 32 digits serial number with the dashes as shown below:
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX
II. Setting up EvolutionTV for TV reception
The Setup Assistant will launch automatically on the first startup of the software. You can
access it at anytime via EvolutionTV > Setup Assistant
The EvolutionTV Setup Assistant will guide you through the set up process and create a list
of settings based on your choices and hardware configuration.
1. Start by selecting your country. If your country is not in the list, select the relevant TVstandard
via the ‘Other’ option.
EvolutionTV™ User Guide
Page 10