MIL-S1000 Front and Rear Panels | Milan Technology specification

Device Description, Features and Capabilities

MIL-S1000 Front and Rear Panels

This section describes the features on the front and rear panels of the MIL-S1000 unit.

Figure 1-2. Front Panel

Figure 1-3. Rear Panel

All LED status indicators are located on the FRONT panel of the switches. They provide a real-time indication of system and operational status. The ports for connections to other devices and networks are also on the front panels, along with the crossover switches. The following sections provide descriptions of the LED indicators and ports.

Image 7

Milan Technology user manual Device Description, Features and Capabilities, MIL-S1000 Front and Rear Panels

Contents

MIL-S1000  Copyright Planning your Network Table of Contents Introduction Module Install and Removed Installation Introduction Package Contents MIL-S1000 Front and Rear Panels Device Description, Features and Capabilities Red Full Duplex/Col indicators Page Ports 10/100Base-TX Module Ports 10/100Base-Tx Module Features Dip switch location and mode settings DIP Switch with Link Mode 8 Ports 10/100Base-TX Module DIP switch functions 2 port 100Base-FX Module Front View Ports 100Base-FX Fiber Module Ports 100Base-FX Fiber Module Features Page 4 port 100Base-TX/FX Front View Ports 100Base-FX Fiber Module Feature Location and setting duplex modePage 1000Base-SX/LX Fiber Module 1000Base-SX/LX Fiber Module Features Enable N-way Full Duplex 10Base-T Ethernet Network Guidelines Planning your Network 100BASE-FX Network Guidelines 100Base-TX Ethernet Network Guidelines Network Planning 1000BASE-SX and LX Network Guideline 10Base-T Networks Expanded Networks Expanding your 100Base-TX network Class 100Base-TX Networks Collapsed Backbone Link Fileserver Link 100Base Solution Fileserver Link Multiport Bridge with High-Bandwidth Backbone 1000Base Solution Used as a Multiport Bridge Installation Rack Installation Supplying PowerPage Connecting the Switch Handling the Modules Module Installation and Removal Insert the module Module Setup and Installation Installing 10/100Base-TX Modules Installing the ModulesInstalling 100Base-FX Modules Removing the Modules Installing 1000Base-SX/LX Modules Compatibility with Ethernet Standards Physical Characteristics Forwarding Rate Switching ArchitectureLED Indicators Address Table Appendix B. Pin Assignments Switch Adapter Hub