194
Once the stacking function has been configured for the master switch, use Cat. 5
cable to connect each switch in the stacking group. Wait a few minutes for the
master switch to communicate and collect the data from the slave switches.
Connect to the master switch through the Web-based interface to access the
following screen.
1. The web-based interface menu bar for the master switch is used to configure
each of the slave switches in the stacking group.
2. To configure a switch in the stacking group, click on the link at the top of
screen and log in to the switch to be configured.
3. Follow the same procedure for configuring each of the slave switches.