Milan Technology MIL-SM2401M-STK manual CLI Management Interface, Commands Level

5.

CLI Management Interface

To enter CLI Command management interface, type “enable” at the command prompt. The following tables list the CLI commands and descriptions.

5-1. Commands Level

Modes	Access		Prompt	Exit	About This Mode1
	Method			Method
					The user commands
					available at the user
					level are a subset of
	Begin a			Enter logout	those available at the
User EXEC	session with		Switch>		privileged level.
				or quit.
	your switch.				Use this mode to
					• Perform basic tests.
					• Display system
					information.
					The privileged
	Enter the				command is advance
Privileged	enable			Enter	mode
	command		Switch#	disable to	Privileged this mode to
EXEC
	while in user			exit.	• Display advance
	EXEC mode.				function status
					• Save configures
Global	Enter the		Switch	To exit to	Use this mode to
	configure			privileged	configure parameters
Configuration			(config)#
	command			EXEC	that apply to your
		23