44
considers the path
cost when selecting
an interface to
place into the
forwarding state.
Use the no form of
this command to
return to the default
value.
stp-path-priority
[Port Priority]
Interface
configuration
mode
Use the
spanning-tree
port-priority
interface
configuration
command to
configure a port
priority that is used
when two switches
tie for position as
the root switch. Use
the no form of this
command to return
to the default value.
128
Switch (config)#
interface
fastEthernet 0/2
Switch (config-if)#
stp-path-priority 127