Milan Technology MIL-W2332G 3.1.2 Save, Save & Restart, and Cancel Commands

21
3.1.2 Save, Save & Restart, and Cancel Commands
Fig. 13. Save, Save & Restart, and Cancel.
At the bottom of each page that contains settings you can configure, there are up to
three buttons—Save, Save & Restart, and Cancel. Clicking Save stores the settings
changes to the memory of the AP and brings you back to the start page. Clicking Save
& Restart stores the settings changes to the memory of the AP and restarts the AP
immediately for the settings changes to take effect. Clicking Cancel discards any set-
tings changes and brings you back to the start page.
If you click Save, the start page will reflect the fact that the configuration settings have
been changed by showing two buttons—Restart and Cancel. In addition, changes are
highlighted in red. Clicking Cancel discards all the changes. Clicking Restart restarts
the AP for the settings changes to take effect.
Fig. 14. Settings have been changed.