28
3.3.3.2 Backing up and Restoring Configuration Settings by HTTP Fig. 24. Firmware backup by HTTP.
To back up configuration of the AP by HTTP:
1. Click Back Up.
2. You’ll be prompted to open or save the configuration file. Click Save.
3. The configuration file is named by the AP’s MAC address. For example, if the AP’s
MAC address is 00-01-02-33-44-55, the configuration backup file should be
“000102334455.hex”. Don’t change the configuration file name in the Save As dia-
log box. Select a folder in which the configuration file is to be stored. And then, click
Save.
NOTE: The procedure may be a little different with different Web browsers.
Fig. 25. Configuration restore by HTTP.
To restore configuration of the AP by HTTP:
1. Click Browse and then select a correct configuration .hex file. You have to make
sure the file name is the AP’s MAC address. The firmware file path will be shown in
the Firmware file name text box.
2. Click Restore to upload the configuration file to the AP.