Miller Electric 300 P manual Inspecting And Cleaning Optional Spark Arrestor Muffler

8-4. Inspecting And Cleaning Optional Spark Arrestor Muffler

3

1

2

Tools Needed: 3/8 in

YStop engine and let cool.

1 Spark Arrestor Muffler

2 Cleanout Plug

Remove plug and remove any dirt covering cleanout hole.

3 Exhaust Pipe

Start engine and run at idle speed to blow out cleanout hole. If nothing blows out of hole, briefly cover end of exhaust pipe with fireproof material.

YStop engine and let cool. Reinstall cleanout plug.

803 582 / Ref. 217 357-A

8-5. Servicing Engine Cooling System

	Y Stop engine and let cool.
	1	Radiator Draincock
	2	Radiator Cap Cover
2	Change coolant according to engine
	manual. Add coolant according to Sec-
	tion 5-6).
	Run engine until engine reaches normal
	operating temperature. Check coolant
	level in recovery tank. Add coolant if nec-
	essary.
	After engine cools, check coolant level
	again and add coolant if necessary.

1

803 563

OM-4433 Page 33