Miller Electric 350 D manual Industrial Applications Processes, Weld Output Rated at 104˚ F 40˚ C

Trailblazer Pro 350 D					Issued March 2006 • Index No. ED/4.65
		®			Diesel Engine-Driven
					Welder/Generator
	Industrial Applications		Processes	Output Range CC/DC: 20 – 350 A
	Mechanical Contractors		MIG (GMAW)		CV/DC: 10 – 34 V
	Rig Owners		Flux Cored (FCAW)		CC/AC: 35 – 250 A
Quick	Structural Steel Work		Stick (SMAW)	Weld Output Rated at 104˚ F (40˚ C)
	Fabrication		Air Carbon Arc (CAC-A)
	Process Plant Piping		TIG (GTAW)	CC/DC and CV/DC: 300 A at 32 VDC, 100% Duty Cycle
Specs
			thru 1/4 in Carbons		350 A at 28 VDC, 60% Duty Cycle
			Cutting and Gouging		CC/AC: 200 A at 25 VAC, 60% Duty Cycle
			Air Plasma Cutting	Generator Power Rated at 104˚ F (40˚ C)
			and Gouging with Optional		12,000 watts continuous
			Spectrum Models	Weight Net: 998 lb (453 kg)
The Power of Blue.
	®
					Weld meters now standard.
The professional welder’s choice with higher outputs is					With a compact and lightweight

designed to deliver the best arc performance with enough weld power to dominate larger diameter flux cored wires and air carbon arc gouging thru 1/4 in carbons.

design at only 998 lb, a smaller truck can be used, and related transportation costs will be reduced. Low height allows the driver to see over the machine when mounted

Toolless top and side engine access allows easy and faster maintenance with little clearance space needed.

Toolless remote oil drain is standard.

Standard 14-pin receptacle easily connects feeders or remote controls for enhanced process operation.

12,000 watts of generator power is regulated to provide constant, strong power and very good motor starting characteristics. Power is independent of weld control settings so that the correct voltage is available at all times.

Strong 120/240 V power while welding to run tools and inverter welders. See page 3 of literature.

Automatic Start at Idle™ idles engine immediately when started, extending engine life and reducing

fuel consumption and noise.

Weld at Idle™ — lock in idle and weld in DC up to 180 A.

Low noise operation allows for better work site communication and safety. 72 db @ 7 m (no load — idle),

78 db @ 7 m (full load — high speed).

on a truck bed and the machine fits sideways in a standard pickup.

Even better weld performance with an arc that dominates the competition. In Stick mode, you get a smooth E7018 and a great E6010 arc with Arc-Drive and Hot Start™ standard. Great MIG/FCAW arc and machine idles with feeders hooked up. More stable AC TIG and excellent starts in DC scratch start TIG.

26 HP, 3-cylinder Kubota diesel engine with its durable, proven liquid-cooled design is the world standard for small diesel engines. Engine shutdowns standard.

Cold weather starting aids such as standard glow plugs and block heater ensure good starts in cold weather.

Automatic idle in all processes, including MIG/FCAW with feeders to save fuel and reduce noise.

Welder/generator is warranted for 3 years, parts and labor.

Engine is warranted separately by the engine manufacturer.

Miller Electric Mfg. Co.	International Headquarters	Web Site
An Illinois Tool Works Company	Phone: 920-735-4505	www.MillerWelds.com
1635 West Spencer Street	USA FAX: 920-735-4134
Appleton, WI 54914 USA	Canadian FAX: 920-735-4169
	International FAX: 920-735-4125