Miller Electric 350 D manual TIG Gtaw Welding, Stick Smaw Welding, MIG/Flux Cored Welding

Genuine Miller Accessories (Continued)

MIG/Flux Cored Welding (Continued) TIG (GTAW) Welding

Spoolmatic® 30A #130 831

A 1-lb, air-cooled spool gun that extends the weld process range by adding a handy portable system for small wire MIG. Rated 200 A at 100% duty cycle. Includes 30 ft (9.1 m) cable assembly. WC Control required. See Lit. Index No. M/1.5.

WC-24 Control #137 549

HF-251 Series

#042 388 HF-251D-1, 115 VAC High-frequency arc starter and stabilizer. See Accessory Literature, Index No. AY/5.0.

RCC-14 Remote Contactor and Current Control #151 086

Rotary-motion fingertip control. Fastens to TIG torch using two Velcro strips. Allows complete current and contactor control at operator’s fingertips. Includes 28 ft (8.5 m) cord and plug.

Extension Cords for 14-Pin

Remote Controls

#122 973 25 ft (7.6 m) #122 974 50 ft (15.2 m) #122 975 75 ft (22.9 m)

To be used with Spoolmatic 30A.

XR Wire Feeders and Guns Push-pull system designed to handle difficult-to-feed soft alloy wires such as aluminum. See Lit. Index No. M/1.7.

MIG (GMAW)/Flux Cored (FCAW) Guns Miller produces a complete line of dependable MIG guns. Check literature for complete details. See Lit. Index Nos. AY/16.0 and AY/17.0.

Stick (SMAW) Welding

Weld Leads

#173 851 2/0, 350 A, 100% duty cycle, 50 ft (15.2 m) stinger, 50 ft (15.2 m) work cable.

#043 952 2/0, 300 A, 100% duty cycle, 100 ft (30.5 m) stinger, 50 ft (15.2 m) work cable.

Remote Controls and Switches

RFCS-14 HD Foot Control #194 744 For all Miller solid-state power sources after serial number JK674521. This new design increases stability with a larger base, and durability with a heavier cord. Maximum flexibility is accomplished with a reconfigurable cord that can exit the front, back or either side of the pedal. Foot pedal provides remote current and contactor control. Includes 20 ft (6 m) cord and 14-pin plug.

RHC-14 Hand Control #129 340

Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 20 ft (6 m) cord and 14-pin plug.

PRHC-14 Hand Control #195 511

For all solid-state power sources after serial number JK674521. Complete current or voltage control brings 120 volts GFCI power to work area in a single cord. Housed in a durable light aluminum case and includes 125 ft (38 m) cord with plugs.

5