Miller Electric 350P manual Selecting Input Voltage 200/230/460 Volt Models Only

.A complete Parts List is available at www.MillerWelds.com

3-14. Selecting Input Voltage (200/230/460 Volt Models Only)

.Be sure to reinstall all four screws securing relinking board in place.

! Turn Off welding power source, disconnect input power, and check voltage on input capacitors according to Section 6-3before proceeding.

.Check input voltage available at site.

1

.Incorrect linking can damage unit and void the warranty.

1 Voltage Selection View Window

Check voltage selected in unit. Changing selection is only neces- sary if selected value does not match available input voltage.

2 Relinking Board PC6

3 Mounting Screws

4 Receptacle RC23 (Connection For 230 VAC Input Power)

5 Receptacle RC46 (Connection For 460 VAC Input Power)

Move relinking board as needed and connect plug PLG32 (in unit) to RC23 or RC46 according to input power voltage.

3

4

2

3

5

Tools Needed:

5/16 in.

803 539-C / 804 042-A

OM-1327 Page 20