4-5. Selecting A Location
Movement
| 2 |
OR | 3 |
|
1
Tipping
! |
Do not move or operate unit where it could tip.
Location
5
18 in
(460 mm)
18 in
(460 mm)
1 Lifting Forks
Use lifting forks to move unit.
Extend forks beyond opposite side of unit.
2Lifting Handles Use handles to lift unit.
3Hand Cart
Use cart or similar device to move unit.
4 Rating Label - Typical
4Use rating label to determine input 
power needs.
5 Line Disconnect Device
Locate unit near correct input power supply.
! Special installation may be required where gasoline or volatile liquids are present − see NEC Article 511 or CEC Section 20.
loc_2 3/96 - 800 611 / 802 260
4-6. Connecting To Weld Terminals
! Turn off power before con- necting to weld output ter- minals.
1 Positive (+) Weld Output Terminal
2 Negative (−) Weld Output Terminal
Connect positive weld cable to Positive (+) weld terminal and negative (−) cable to Negative weld terminal.
Tools Needed:
12
Ref. 802 260
