NEC GT6000 user manual Installation, 2-15, Connecting Your DVD Player, DVD player

2. Installation

Connecting Your DVD Player

Optional 15-pin-to-RCA (female)×3 cable (ADP-CV1)

		AUDIO	DVI
AUDIO OUT		RGB 1	RGB 1
L/MONO		L/MONO
R	AUDIO	R

	RGB 2		R/Cr
	RGB OUT		G/Y
RGB 2
	VIDEO	S-VIDEO	B/Cb
			H/
			HV
			V
	L/MONO	L/MONO
	R	R

USB A	USB B	PC CARD
	PC CONTROL		LAN
	IN
			REMOTE 1
	OUT
	SC TRIGGER		REMOTE 2
		IN	OUT
			AC IN

Audio cable (not supplied)

RCA(female)-to-BNC(male) adapter (not supplied)

Component video RCA×3 cable (not supplied)

Audio Equipment

DVD player

L R		Y Cb Cr
AUDIO	OUT	Component

Audio cable (not supplied)

AUDIO IN

LR

You can connect your projector to a DVD player with component output or Video output. To do so, simply:

1.Turn off the power to your projector and DVD player.

2.If your DVD player has the component video (Y,Cb,Cr) output, use a commercially available component video cable (RCAX3) and the optional 15-pin-to-RCA (female)×3 cable to connect your DVD player to the RGB 1 IN or 2 IN connector on the projector.

For a DVD player without a component video (Y,Cb,Cr) output, use an S-Video cable (not supplied) to connect an S-Video output of the DVD player to the S-Video input of the projector. Use an appropriate type of audio cable (not supplied) to con- nect the desired type of audio from your DVD player to your audio equipment.

3. Turn on the projector and DVD player.

NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements,

2-15