8. Using
Setting a Password
A password can be set for your projector to avoid operation by an unauthorized person.
There are two password options: one for menu and the other for logo.
When a password is set, doing any one of the following four op- erations will display the Password input screen.
For Menu:
*Changing the menu to Advanced
*Editing the custom menu
For Logo:
*Changing the background
*Changing the logo data in PC Card Files
Delete
To delete your password:
1.Highlight [Delete] and press the ENTER button. The "Current Pass- word" screen will be displayed.
2.Use the Software keyboard to type your password. Highlight "OK" on the “Current Password” screen and then press the ENTER button.
Procedures for Password setting apply to both Menu and Logo.
Entry
To assign your password:
NOTE: Up to 15 alphanumeric characters can be assigned.
•Only numbers can be entered when you use the remote control Source/Input buttons.
1.Type a password.
Highlight "Entry" and press the ENTER button. The "Enter the Password screen" will be displayed.
Make sure that "" is highlighted and then press the ENTER button. The Software keyboard appears. Use the Software keyboard to type a password and then highlight "OK" on the “Enter the Password” screen and press the ENTER button.
The [Confirm Password] screen will be displayed.
2.Type the same password again. Highlight "OK" on the “Enter the Pass- word” screen and press the ENTER button.
Your password will be assigned.
Your password will be deleted.
In case you forget your password, follow the steps below to de- lete it.
1.Select the Advanced menu from the Basic menu. The "Password" entry screen will be displayed.
2.Use the Software keyboard to type "1111".
Highlight "OK" on the “Password” entry screen and then press the EN- TER button.
The "Password Warning!!" message will be displayed.
3.Use the Software keyboard to type "3333".
Highlight "OK" on the “Password” entry screen and then press the EN- TER button.
The "Password Warning!!" message will be displayed.
4.Use the Software keyboard to type "5555".
Highlight "OK" on the “Password” entry screen and then press the EN- TER button.
The "Delete Password. Are you sure? Yes/No" dialog box will be dis- played.
5.Use the SELECT or button to highlight "Yes" and press the EN- TER button.
Your password will be deleted.
