NEC GT6000 Using On-ScreenMenu, Tools, 8-26, To delete PC card data you registered, Timer

8. Using On-Screen Menu

(3)When you attempt to display an image for which security is set while the security function is enabled

•Blanks (spaces) cannot be used in the Keyword section.

To delete PC card data you registered.

1.Use the SELECT ￿￿ button to select "Delete" and use the SELECT ￿ button to select the list window.

2.Use the SELECT ￿￿ button to select the PC card data you wish to delete.

3.Press the SELECT ￿ button to select "Delete" and press the ENTER button.

The PC card data will be deleted.

If you've lost your registered PC card, proceed as follows:

NOTE: NEC or your dealer will provide you with your Release Code in exchange for your registered keyword and Request Code. See URLs at the end of this section.

1.Press and hold the POWER button for a minimum of two seconds.

The projector will be turned on and display a message to the effect that the projector is security-protected.

2.Select [Projector Options] → [Security] from the menu and press hte ENTER button.

The Release Code input screen will be displayed as well as your Re- quest Code (24 alphanumeric characters).

3.Enter your Release Code in the Release Code Input screen.

*If the projector is turned on by entering the Release Code, your Secu- rity will be disabled.

NOTE:

*Some types of PC cards cannot be registered as your protect key.

*It is recommended that you register two or more PC cards in case you lose or damage your registered PC card.

*Formatting your registered PC card will disable your protect key function.

NOTE:

For additional information visit:

US : http://www.necvisualsystems.com

Europe : http://www.neceurope.com/

Global : http://www.nec-pj.com/

Tools

Provides tools for setting On/Off timer, sleep timer, capturing im- ages, displaying files or changing your background logo in a PC Card and drawing.

Timer

Enables you to turn on or off your projector automatically at a specified time. Two timer functions are available: On/Off Timer and Sleep Timer.

NOTE: The projector has a built-in clock. The clock will keep working for about three days after the main power is turned off. If the main power is not supplied to the projector for three days or more, the built-in clock stops working.

On/Off Timer

Up to 10 settings can be programmed.

•Before setting On/Off Timer, make sure that Date, Time Preset feature is set.

•Even after setting On/Off Timer, turning the projector on or off with the remote control is possible.

Setting the On or Off Timer

1. Open the On/Off Timer window.

2.Select a program number (No. 1 to 10) by using the SELECT ￿ or ￿ button.

8-26