NEC GT6000 Using On-ScreenMenu, 8-16, Selecting Operation Mode Operation Mode Select, Page

8. Using On-Screen Menu

Selecting Operation Mode [Operation Mode Select]

Set the operation mode of the USB mouse connected to the USB port (MOUSE/HUB) on the projector

Auto	Depending on connection of the USB port (PC)
	on the projector and a USB port (type A) on your
	PC, the USB mouse is operated in the following
	way:
	* When connecting the projector to your PC
	The USB mouse connected to the projector
	can be used as a PC mouse.
	* When not connecting the projector to your PC

The USB mouse connected to the projector can perform menu operation of the projector.

Projector ...... The USB mouse connected to the projector can

perform menu operation of the projector.

[Page 3]

Selecting Signal Format [Signal Select]

RGB1/2

Allows you to choose "RGB" for an RGB source such as a computer, or "Component" for a component video source such as a DVD player.

Normally select "RGB/Component" and the projector automati- cally detects an either incoming signal. However there may be some component signals that the projector is unable to detect. If this is the case, select "Component". Select "Scart" in RGB 1 or 2 for the European Scart.

VIDEO, S-VIDEO and RGB1 (Video and S-Video)

This feature enables you to select composite video standards manually.

Normally select "Auto". Select the video standard from the pulldown menu. This must be done for Video and S-Video sepa- rately and "VIDEO" or "S-VIDEO" for RGB1 connector.

[Page 4]

Enabling Auto Adjust [Auto Adjust]

When "Auto Adjust" is set to "On", the projector automatically determines the best resolution for the current RGB input sig- nal to project an image using NEC's Advanced AccuBlend In- telligent Pixel Blending Technology.

The image can be automatically adjusted for position and sta- bility; "Horizontal Position", "Vertical Position", "Clock", "Phase", and "Resolution".

On	Automatically adjusts image "Horizontal Posi-
	tion", "Vertical Position", "Clock", "Phase" and
	"Resolution".
Off	User can adjust the image display functions
	("Horizontal Position", "Vertical Position", "Clock",
	"Phase" and "Resolution") manually.

Enabling Auto Start [Auto Start]

Turns the projector on automatically when the power cable is inserted into an active power outlet and the main power switch is turned on.

This eliminates the need to always use the "Power" button on the remote control or projector cabinet.

Enabling Power Management [Power Management]

When this option is on and there is no input for five minutes or more, the projector will automatically turn itself off.

Enabling Power Off Confirmation [Power Off Confirmation] This option determines whether a confirmation dialog for turn- ing off the projector will appear or not.

Enabling Horizontal and Vertical Keystone Correction Save [3D Reform Save]

This option enables you to save your current 3D Reform set- tings. Saving your change once affects all sources.The changes are saved when you turn off the projector.

Selecting Built-in Speakers [Built-in Speaker]

This option allows you to mute the built-in speakers.

8-16