8. Using
Ref. Adjust
Using 3D Reform
This feature corrects trapezoidal distortion so that the projected image is rectangular.
Two options are available for correcting procedures.
You can save adjustment settings by using the 3D Reform Save option on Setup (See page
Cornerstone
See page
*When "Resolution" is set to "Native", "Cornerstone" and "Key- stone" are not available.
Keystone
Position
This feature adjusts the vertical position of the image when view- ing video with an aspect ratio selected.
When some aspect ratios are selected in Image Options, the image is displayed with black borders on the top and bottom. You can adjust the vertical position between top and bottom.
NOTE: This option is available only when "1.78:1 (16:9)", "1.85:1" and "2.35:1 " are selected in Screen Type and Aspect Ratio.
NOTE: During 3D Reform adjustment, "Screen Type" and "Screen Position" may not be available. To make available, first reset the 3D Reform data and then do settings again. Secondly repeat the 3D Reform adjustment. Changing "Screen Type" and "Screen Position" can limit 3D Reform in its adjustable range.
Reference White Balance [Ref. White Balance]
1.Press the SELECT or button to adjust the horizontal keystone.
2.Press the SELECT or button to select "Vertical".
3.Press the SELECT or button to adjust the vertical keystone.
4.After completing, press the ENTER button. This will return to the menu screen.
Screen
Screen Type
Select the correct aspect ratio for the screen to be used. See also "Aspect Ratio" on page
NOTE: When "Resolution" is set to "Native", this selection is inactive.
Brightness R/G/B, Contrast R/G/B
This feature adjusts the white balance that is used as a refer- ence. This adjustment affects all sources.
Reference Color Correction [Ref. Color Correction]
Red/Green/Blue/Yellow/Magenta/Cyan/Color Gain
This option allows you to adjust red, green, blue, yellow, cyan, magenta or color gain.
