Miller Electric Dimension 1000 manual Tipping, Do not move or operate unit where it could tip

4-6. Tipping

! Do not move or operate unit where it could tip.

4-7. 115 VAC Receptacle, Supplementary Protectors, And Weld Output Terminals

3

2

1

			!	Turn Off power before
				connecting to receptacle, or
				weld output terminals.
			1	115 V 15 A AC Receptacle
				RC9
			Power is shared between RC9, Re-
			mote 14 receptacle RC8 and termi-
			nal strip 1T (see Section 4-11).
			2	Supplementary Protector CB1
			3	Supplementary Protector CB2
			CB1 protects 115 volts ac portion of
			RC8, 1T, and RC9 from overload.
			CB2 protects 24 volts ac portion of
			RC8 and 1T from overload.
			Press button to reset protector.
			4	Positive High Inductance
				(Submerged Arc) Weld Output
				Terminal
			Use this terminal for Submerged
			Arc (SAW), TIG (GTAW)-scratch
	5	6	start only, or Stick (SMAW) applica-
4			tions.
			5	(+) Positive Low Inductance
				Weld output terminal
			Not recommended for Submerged
			Arc applications.
			6	(−) Negative Weld Output
				Terminal

Connect work cable to this terminal for Submerged Arc applications.

Ref. 802 295

OM-2223 Page 16