SECTION 6 − MAINTENANCE & TROUBLESHOOTING
6-1. Routine Maintenance
!
Disconnect and lockout/tagout input power before per- forming maintenance or troubleshooting procedures.
3 Months
Replace unreadable labels.
Repair or replace cracked weld cable.
Clean and tighten weld terminals.
6 Months
Blow out or vacuum inside.
During heavy service, clean monthly.
OR
6-2. Fuse F1
1
! Turn Off power before open- ing rear access door.
1Fuse F1 (See Parts List For Rating)
Fuse F1 protects control transform- er from overload. If F1 opens, weld output and fan motor stops. Re- place F1.
Tools Needed:
3/8 in | Ref. 802 295 |
