Manuals / Miller Electric / Power Tools / Welder

Miller Electric and DS-74D16, DS-74S12, DS-74S16, DS-74D12 manual California Proposition 65 Warnings

Models: DS-74D12 DS-74S12 and DS-74D16 DS-74S16

1 44
Download 44 pages 3.5 Kb
Page 7
Image 7

1-3. Additional Symbols For Installation, Operation, And Maintenance

FIRE OR EXPLOSION hazard.

D Do not install or place unit on, over, or near combustible surfaces.

DDo not install unit near flammables.

DDo not overload building wiring − be sure power supply system is properly sized, rated, and protected to handle this unit.

FALLING UNIT can cause injury.

DUse lifting eye to lift unit only, NOT running gear, gas cylinders, or any other accessories.

DUse equipment of adequate capacity to lift and support unit.

DIf using lift forks to move unit, be sure forks are long enough to extend beyond opposite side of unit.

MOVING PARTS can cause injury.

DKeep away from moving parts such as fans.

DKeep all doors, panels, covers, and guards closed and securely in place.

DHave only qualified persons remove doors, panels, covers, or guards for maintenance as necessary.

DReinstall doors, panels, covers, or guards when maintenance is finished and before re- connecting input power.

READ INSTRUCTIONS.

DRead Owner’s Manual before using or servic- ing unit.

DUse only genuine Miller/Hobart replacement parts.

OVERUSE can cause OVERHEATING

DAllow cooling period; follow rated duty cycle.

DReduce current or reduce duty cycle before starting to weld again.

DDo not block or filter airflow to unit.

STATIC (ESD) can damage PC boards.

DPut on grounded wrist strap BEFORE handling boards or parts.

DUse proper static-proof bags and boxes to store, move, or ship PC boards.

MOVING PARTS can cause injury.

DKeep away from moving parts.

DKeep away from pinch points such as drive rolls.

WELDING WIRE can cause injury.

DDo not press gun trigger until instructed to do so.

DDo not point gun toward any part of the body, other people, or any metal when threading welding wire.

H.F. RADIATION can cause interference.

DHigh-frequency (H.F.) can interfere with radio navigation, safety services, computers, and communications equipment.

DHave only qualified persons familiar with electronic equipment perform this installation.

DThe user is responsible for having a qualified electrician prompt- ly correct any interference problem resulting from the installa- tion.

DIf notified by the FCC about interference, stop using the equipment at once.

DHave the installation regularly checked and maintained.

DKeep high-frequency source doors and panels tightly shut, keep spark gaps at correct setting, and use grounding and shielding to minimize the possibility of interference.

ARC WELDING can cause interference.

DElectromagnetic energy can interfere with sensitive electronic equipment such as computers and computer-driven equipment such as robots.

DBe sure all equipment in the welding area is electromagnetically compatible.

DTo reduce possible interference, keep weld cables as short as possible, close together, and down low, such as on the floor.

DLocate welding operation 100 meters from any sensitive elec- tronic equipment.

DBe sure this welding machine is installed and grounded according to this manual.

DIf interference still occurs, the user must take extra measures such as moving the welding machine, using shielded cables, using line filters, or shielding the work area.

1-4. California Proposition 65 Warnings

YWelding or cutting equipment produces fumes or gases which contain chemicals known to the State of California to cause birth defects and, in some cases, cancer. (California Health & Safety Code Section 25249.5 et seq.)

YBattery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

For Gasoline Engines:

YEngine exhaust contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

For Diesel Engines:

YDiesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm.

OM-1500-13 Page 3

Page 6 Page 8
Page 7
Image 7
Miller Electric and DS-74D16, DS-74S12, DS-74S16, DS-74D12 manual California Proposition 65 Warnings
Page 6 Page 8

DS-74D12, DS-74S12, and DS-74D16, DS-74S16 specifications

Miller Electric has long been recognized for its high-quality welding and cutting equipment. Among their extensive lineup, the DS-74S16, DS-74D16, DS-74S12, and DS-74D12 models stand out for their robust features and advanced technologies tailored for professional welders and metal fabricators.

The Miller DS-74S16 is particularly engineered for heavy-duty applications, making it perfect for industrial environments. It boasts a powerful input range, providing versatility for different welding processes. Its user-friendly interface allows for quick adjustments, ensuring efficiency during operation. The design emphasizes safety and reliability, with protections against overcurrent and thermal overload. Similarly, the DS-74D16 offers dual capabilities for welding and cutting, which adds flexibility to a welder's toolkit. This model integrates advanced digital controls that help maintain consistent performance, enhancing the overall quality of the welds produced.

Moving on to the DS-74S12 and DS-74D12 models, these versions cater to lighter applications without compromising on quality. The DS-74S12 is designed with portability in mind, making it an excellent choice for fieldwork and smaller workshops. It features a compact design while still delivering impressive performance, ideal for less demanding tasks. The DS-74D12 variant shares this lightweight construction but offers the added benefit of dual-functionality. Users can effortlessly switch between welding and cutting, accommodating various project requirements.

Across the board, these models incorporate Miller’s innovative technologies. Their advanced inverter technology helps increase efficiency, reduce energy consumption, and minimize noise levels during operation. Additionally, the use of durable materials ensures longevity and resilience in harsh working conditions.

The entire range is characterized by ease of maintenance and serviceability, with components designed for quick replacement when needed. User support and comprehensive documentation provided by Miller Electric further enhance the experience for both novice and experienced welders.

Overall, the DS-74S16, DS-74D16, DS-74S12, and DS-74D12 models represent a perfect blend of power, flexibility, and precision, catering to the evolving needs of professionals in the welding industry. These machines are suitable for diverse applications, ranging from heavy industrial tasks to light repairs, making them an invaluable addition to any welder’s arsenal.