Miller Electric Intellifire 250 manual Installation, Specifications

SECTION 3 − INSTALLATION

3-1. Specifications

		Required	Amperes Input at
Output			Rated Load Output 50
	Rated Output	Reflective	or 60 Hz, Three-Phase			Overall Dimensions	Weight
Frequency
		Inductance
			460 V	KVA	KW
	25 kW At					Length: 31 in
						(787 mm)
	100% Duty
		2.5 To 50 μh	39			Width: 16 in	165 lb
10 To 50 kHz	Cycle − Max			30.8	27.19
			0.29*			(406 mm)	(75 kg)
	750 A (RMS),
						Height: 27 in
	700 V (RMS)
						(686 mm)
*While idling

WARNING

HIGH-FREQUENCY RADIATION can interfere with radio navigation, safety services, computers, and communications equipment.

• Have only qualified person familiar with electronic equipment perform this installation.

•The user is responsible for having a qualified electrician promptly correct any interference problem resulting from the installation.

•If notified by the FCC about interference, stop using the equipment at once.

•Have the installation regularly checked and maintained.

•Keep high-frequency source doors and panels tightly shut.

3-2. Connecting Head/Coil to Power Source

		1	Rear Panel
2	1	2	Connecting Block

. Do Not Exceed 58 in lb

(6.6 N.m) of torque when making connections.

Tools Needed:

7/16 in

Ref. ST-801 826-C

OM-184 227 Page 7