Miller Electric Millermatic 212 manual Drive Rolls, For Spoolmate 3035 Gun

Consumables (Order from Miller Service Parts.)
For M-25 Gun		#169 726
		5/8 in (16 mm) diameter orifice.
		Nozzle flush with contact tip.
		#169 727
Contact Tips		5/8 in (16 mm) diameter orifice. Contact tip
		sticks out of nozzle 1/8 in (3.2 mm).
#087 299 .023/.025 in (0.6 mm)
#000 067 .030 in (0.8 mm)		#169 724
#000 068 .035 in (0.9 mm)		1/2 in (13 mm) diameter orifice. Contact tip
#000 069 .045 in (1.1 mm)		recessed 1/8 in (3.2 mm) into nozzle.
#187 117 .035 in (0.9 mm) heavy-duty tip		#169 725
#187 118 .045 in (1.2 mm) heavy-duty tip
		5/8 in (16 mm) diameter orifice. Contact tip
Tapered Contact Tips
		recessed 1/8 in (3.2 mm) into nozzle.
#176 797 .030 in (0.8 mm)
#176 793 .035 in (0.9 mm)		Spot Nozzles
#176 794 .045 in (1.2 mm)		#176 238	Flat
		#176 240	Inside corner
		#176 242	Outside corner
		Tapered Nozzles
Contact Tip Adapter #169 728		Note: Tapered tips are recommended when using a
		tapered nozzle.
		#176 243 3/8 in (9.5 mm) diameter orifice
		#178 386 11/32 in (8.7 mm) diameter orifice
Replacement Liners
#194 010	.023/.025 in
#194 011	.030 –.035 in (standard)
#194 012	.035 –.045 in

Gun Convenience Kit #193 975

Contains:

5 – .035 in (0.9 mm) contact tips (#000 068) 5 – .045 in (1.2 mm) contact tips (#000 069) 2 – Tip adapters (#169 728)

1 – Nozzle adapter (#169 729)

3 – O-rings (#170 468)

2 – Shock washers (#169 730)

1 – 5/8 in (16 mm) diameter orifice nozzle (#169 726)

Nozzles

Note: Flush or stickout nozzles should be used for the short-circuit process.

#200 258 Standard

1/2 in (13 mm) diameter orifice. Nozzle flush with contact tip.

6

Drive Rolls

Note: Drive roll kits include two drive rolls and an inlet guide.

V-Grooved Drive Roll Kits (solid wire) #204 579 .030 & .035 in (0.8 & 0.9 mm)

Combination (Reversible) #087 131 .023/.025 in (0.6 mm) #079 594 .030 in (0.8 mm)

#079 595 .035 in (0.9 mm)

V-Knurled Drive Roll Kits

(Flux Cored or difficult-to-feed wire) #079 606 .035 in (0.9 mm)

For Spoolmate™ 3035 Gun

Contact Tips (5 per package)

#199 730 For .023/.025 in (0.6 mm) wire. #186 419 For .030 in (0.8 mm) wire. #186 406 For .035 in (0.9 mm) wire.

Nozzle #186 405

Drive Roll (1)

#199 731 For .023 in (0.6 mm) wire. #186 413 For .030/.035 in (0.8/0.9 mm) wire.

Push Roll (1)

#199 732 For .023 in (0.6 mm) wire. #186 414 For .030/.035 in (0.8/0.9 mm) wire.