Miller Electric OM-222 General Terms Sequence, Preflow, Start, Crater, Postflow, Feeder Set Up

General Terms:
Sequence	Selecting Sequence will allow setting of preflow, start, crater, and postflow times and parameters.
Preflow	Setting a time value for gas flow prior to arc start.
Start	Provides voltage/arc adjust, wire feed rate, and time value for modified arc starts (which is only
	adjustable with the optional PDA with File Management/WaveWriter software).
Crater	Allows setting of voltage/arc adjust, wire feed rate, and time value for arc ends.
Postflow	Setting a time value for gas flow after arc end.
Feeder Set Up	Allow selection of Sequence and trigger functions.
Auto Thread	Method of jogging wire without holding jog or trigger switch. Pressing Jog and Retract simultaneously
	will automatically feed wire. Default setting is 192 at a feed rate of 700 ipm (these values can be
	changed using a PDA with File Management/WaveWriter software). Pressing jog, purge, or trigger
	switch will terminate the auto-threading feature.

OM-222 394 Page 16