In the live thermal image in Figure 8, the 411.3 °F reading at the top of the display is the temperature inside the center target. The bottom of the display shows the color palette over the temperature span (in this case, 370 °F to 446 °F). Span is adjusted automatically in
120.6˚F | |
LOW BATTERY |
|
AUTO | MANUAL |
LOW BATTERY 86 | 122 |
Figure 8. Live Thermal Image
6.When the display shows the object or scene framed the way you want it, pull the trigger to take a thermal picture. The display then presents you with choices to SAVE or CANCEL the new image. See Figure 9.
138.9˚F | |
SAVE | CANCEL |
95 | 230 |
Figure 9. SAVE or CANCEL a New Image
7.To write the image to SD card, press the 
button on the arrow keypad or pull the trigger again. Or, to discard the image, press the 
arrow button to highlight CANCEL, then press the 
button.
NOTE
Every minute, the Thermal Imager pauses to calibrate its thermal sensor. You will hear clicking sounds. This is normal behavior. The Thermal Imager does not respond to button presses during calibration pauses.
M12 160x120 Thermal Imager Operator's Manual | 15 |
