How to Use the Manuals
All of the manuals needed to safely and properly operate the Thermal Imager are available in Adobe® PDF (Portable Document Format) on the CD. You can easily load these PDF documents from the CD or from the MILWAUKEE website onto your computer. There, you read them on the computer screen, search for topics or keywords, or print pages from them.
NOTE
To open and read the PDF manuals, your PC uses Adobe® Acrobat®. If your PC does not already have Acrobat Reader, you can install it at no cost by following the prompts on the PC when you run the CD supplied with your Thermal Imager. Adobe® and Adobe Reader® are registered trademarks of Adobe Systems Incorporated in the United States and other countries.
The following manuals are supplied with the Thermal Imager:
M12 160x120 Thermal Imager Operator’s Manual: this explains how to use the Thermal Imager. Thermal Imager Specifications and a Glossary of Terms are located at the back of this manual.
Thermal Imager Report Software Manual: this explains how to use MILWAUKEE Thermal Imager Report Software to produce a report. You load this manual onto your computer from the product CD when you install the software. It opens for viewing whenever you press F1 or “Help” while using the software.
M12 Battery Charger and Battery Operator’s Manual: this is a printed booklet that you should read and understand before using the product. It contains important warnings and information for proper battery handling and charging. Improper usage, handling or charging of the batteries can cause risk of fire or injury. You must first charge the battery before you use the Thermal Imager.
Warranty and Safety Information: this is a printed booklet with the Warranty, safety information from the Operator’s Manuals for the battery, charger and Thermal Imager and an explanation of symbols on the product and in the documentation.
Reference Card: this is a printed, folded,
4 | M12 160x120 Thermal Imager Operator’s Manual |
