![](/images/new-backgrounds/1055209/5520947x1.webp)
Changing the Settings
Use the SETUP menu to set the TIME, TIME FORMAT, DATE, DATE FORMAT, SCALE (˚F or ˚C), BRIGHTNESS, LANGUAGE, and the way to erase images on the installed SD memory card. To call up the SETTINGS menu, from live mode press , then
if needed to select SETTINGS, then
to confirm your selection. The SETTINGS menu is shown in Figure 15.
SETTINGS
EMISSIVITY | 0.95 |
TIME | 10:45PM |
TIME FORMAT | 12 HR |
DATE | 09/29/2011 |
DATE FORMAT | MM/DD/YYYY |
SCALE | ˚F |
BRIGHTNESS | ENGLISH |
LANGUAGE |
ERASE SD MEMORY CARD
Figure 15. The Settings Menu
1Press and
to select the menu item to set, followed by
t to confirm your slection.
2.Press and
to change the setting, followed by
to confirm the change. Changes you make to settings remain in effect even after you turn off the power and turn it back on again.
22 | M12 160x120 Thermal Imager Operator’s Manual |