WORK AREA SAFETY
•Keep work area clean and well lit. Cluttered or dark areas invite accidents.
ELECTRICAL SAFETY
•Do not expose hand warmer to rain or wet conditions. Water will increase the risk of electric shock.
•Do not abuse the power cable. Never use the cord for carrying, pulling or unplugging the hand warmer. Keep cord away from heat, oil, sharp edges or moving parts.
PERSONAL SAFETY
•Stay alert, watch what you are doing and use common sense when using the hand warmer. Do not use while you are tired or under the influ- ence of drugs, alcohol or medication. A moment of inattention may result in serious personal injury.
POWER TOOL USE AND CARE
•Do not use the hand warmer if the power button does not turn it on and off. Any hand warmer that cannot be controlled with the power button is dangerous and must be repaired.
•Disconnect the battery pack from the hand warmer before storing. Such preventive safety measures reduce the risk of starting the hand warmer accidentally.
•Store out of the reach of children and do not al- low persons unfamiliar with these instructions to operate the hand warmer. Hand warmer can be dangerous in the hands of untrained users.
•Maintain hand warmer. Check for breakage of parts and any other condition that may affect the hand warmer’s operation. If damaged, have the hand warmer repaired before use.
•Use the hand warmer in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the hand warmer for operations different from those intended could result in a hazardous situation.
contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
SERVICE
•Have your hand warmer serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the hand warmer is maintained.
SPECIFIC SAFETY RULES
Read instructions carefully.
Use:
•Do not use this hand warmer with an infant, child, a helpless person, or anyone insensi- tive to heat, such as a person with poor blood circulation.
•If you have a medical condition making you sensitive to overheating, or you use any personal medical devices, consult the devise manufacturer and/or your physician to determine if use of this product is appropriate.
•Never use if inner liner is wet.
•Heating elements are not recommended to touch bare skin.
•Shut off power immediately if discomfort occurs.
•Do not allow the cords to be pinched.
•If improper operation of this hand warmer is observed, discontinue its use immediately and contact a MILWAUKEE service facility for repair.
•Donotusepins.Theymaydamagetheelectricwiring.
Care:
•Disconnect and remove battery pack and bat- tery holder from battery holder pocket before washing.
•Push the power cord completely into the bat- tery holder pocket and zip closed.
•Follow Care Instructions on hand warmer tags. Hand wash in cold water. Hang dry. Do not machine wash or dry.
•Do not bleach.
•Do not iron.
2
| | | 1 |
5 | 3 | | |
| | |
| | | M12 |
| 4 | | |
1. Power button | 2. | Battery holder pocket |
High: Red LED | 3. | Power cable |
Medium: White LED | 4. | Power cable port |
Low: Blue LED | 5. | Battery holder |
| |
ASSEMBLY
WARNING Recharge only with the charger specified for the battery. For specific charging instructions, read the operator’s man- ual supplied with your charger and battery.
Inserting/Removing the Battery
To insert the battery, slide the pack into the body of the battery holder. Make sure it latches securely into place.
Insert the power cable (from inside the battery holder pocket) into the power cable port on the battery holder.
Place the battery holder into the pocket and zip pocket closed.
To remove the battery, push in the release buttons and pull the battery pack away from the holder.
the hand warmer before performing any maintenance. Never disassemble the hand warmer, battery pack or charger. Contact a MILWAUKEE service facility for ALL repairs.
If the hand warmer does not start or operate prop- erly with a fully charged battery pack, clean the contacts on the battery pack. If the hand warmer still does not work properly, return the hand warmer, charger and battery pack, to a MILWAUKEE service facility for repairs.
WARNING To reduce the risk of personal injury and damage, disconnect and remove battery pack and battery holder from battery holder pocket before washing. Never immerse your battery holder, battery pack, or charger in liquid or allow a liquid to flow inside them.
To clean the hand warmer:
1.Remove battery pack and battery holder.
2.Push the power cord completely into the battery holder pocket and zip closed.
3.Hand wash in cold water. Do not machine wash. Do not use bleach. Do not dry clean. Do not wring or twist.
4.Hang dry. Do not machine dry. Do not iron.
BATTERY TOOL USE AND CARE
•Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
•Use hand warmer only with specifically des- ignated battery packs. Use of any other battery packs may create a risk of injury and fire.
•When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery termi- nals together may cause burns or a fire.
•Under abusive conditions, liquid may be eject- ed from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid
•Do not wring or twist.
•Do not dry clean. Do not use dry-cleaning fluid on this hand warmer. Do not bleach. Cleaning solvents may have a deteriorating effect on the insulation of the heating element.
•Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.
SPECIFICATIONS | | SYMBOLOGY |
| | | | |
Cat. No. | Volts DC | | | Volts |
2321-20 | 12 | | |
2322-20 | 12 | | | |
| | |
43-72-1000 | 12 | | | Direct Current |
| | | |
| | | | |
OPERATION
The power button is located inside the battery holder pocket.
To turn on, press and hold the hand warmer power button (1 to 2 seconds). The hand warmer will be turned to High and the red LED will light.
Temperature setting can be adjusted at any time by pressing the hand warmer power button. Each press will cycle through the hand warmer’s tem- perature settings.
To turn off the hand warmer, press and hold the hand warmer power button until the LED turns off (1 to 2 seconds).
If the hand warmer turns off unexpectedly, check connections and charge the battery pack.
ACCESSORIES
WARNING Always remove battery pack before changing or removing accessories. Only use accessories specifi- cally recommended for this tool. Others may
be hazardous.
For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog or go online to www.milwaukeetool.com. To obtain a catalog, contact your local distributor or service center.
